|
balthazor
Netherlands
117 berichten |
 Geplaatst - 04 jul 2007 : 16:14:17
|
Ik had een probleem met het aantal modules dat opgegeven was in mijn twincenter zie http://www.beneluxspoor.net/index.php?option=com_smf&Itemid=29&topic=5203.0
Volgens Wim die weer IBXSO citeerde
[citaat IBXSO]
Changes of Dynamic Values
The dynamic value of an SO changes automatically when its static value is changed from the panel of the Intellibox.
Some commands may cause a change of the operational value of a Special Option in dynamic working memory. The command descriptions in the protocol documentation will mostly mention which SOs are involved. Examples of dynamic changes are:
The baudrate of the interface as specified by SO#1 may be changed with the P50Xa command 'B' (there is no equivalent P50Xb command).
The CTS timing as specified by SO#6 may be changed with the P50Xa command 'RT' (there is no equivalent P50Xb command).
The P50X lead-in character as specified by SO#7 may be changed with the P50Xb command XP50XCh, or with the P50Xa command 'PX'.
The number of S88s being physically read by the Intellibox as specified by SO#8 may be changed with the P50Xb command X88PSet or with the P50Xa command 'SE'.
When reading an S88 with a P50 or P50X command beyond the highest number currently scanned, the scanning by the Intellibox will be extended automatically to 8, 16, or 31 S88s (corresponding to SO#8 values 16, 32 or 62). Note: The P50 command 0xC4 (read S88 number 4), as frequently used in baudrate and protocol determination procedures, may also have this effect!
Turnout timing as specified by SO#13 and SO#14 may be changed with the P50Xa command 'MT' (there is no equivalent P50Xb command).
[/citaat]
Zou koploper het aantal goed moeten zetten als ik in koploper het juiste aantal opgeef
Maar dat doet / deed hij niet bij mij ik moest echt in de twincenter opgeven hoeveel modules ik had.
Klopt het dat koploper dat dus niet doet of is er een andere rede.
Erik.
MBZE: Modelbaan Zonder Eind
fleischmann/twincenter/koploper
|
Bewerkt door balthazor op 04 jul 2007 16:15:09 |
|
S88 modules
